 Neutrik NAC3MPB-1-WOT Power out, air-tight D chassis connector with flat tab terminals. The NAC3MPB -1-WOT has no rear cover allowing extra access to the terminals useful when soldering large cables A Locking 3 conductor equipment AC connector, contacts for line, neutral and pre-mating ground contact. With a fast and easy locking system and high current capacity (20 A rated) the NAC3MPB -1-WOT is extremely robust and reliable. Meets all prevailing safety standards, UL recognized, VDE certified and SEV approved. Very good cable handling and protection. Note: The PowerCON is a connector without breaking capacity, i.e. the PowerCON should not be connected or disconnected under load or live! Number of contacts: 3 - for line, neutral and predating safety ground Rated current per contact: 20 A rms Rated voltage: 250 V ac Dielectric strength: 4000 V dc Chassis shape: D Wiring: Flat tabs for 3/16in (FASTON 4.8 x 0.5 mm) or soldering Locking device: Quick Lock NAC3FCA and NAC3MPA-1 are used for 'power in' to a unit NAC3FCB and NAC3MPB-1 are used for 'power out' of a unit Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating. Branded with unique hologram - guarantees genuine and authentic Neutrik product | 
